This super concentrated car shampoo not only smells great but gives great lubricity to your wash mitt to help you glide across the paintwork
Simply dilute 1:2000 using warm clean water
Approximately one cap full to your bucket then add warm water.
Our polish in non-abrasive and is designed to be a perfect base to compliment our Clarity Sealant and Wax whilst leaving a deep shine.
Simply apply with an applicator pad in circular motions overlapping as you go.
Allow to dry for 10-15 minutes then buff off using a clean microfibre cloth
Clarity Nano Sealant
Our sealant with its Nano technology will protect your car for up to 6 months.
The added UV protection will protect your paintwork from fallout and the suns harmful rays, which can cause paint to fade if not protected.
Simply apply to the paint with an applicator pad in long straight lines and allow to dry depending on the weather for around 10-15 minuets.
For best results don't apply in direct sunlight but if you must reduce curing time.
Seal 1 - 3 panels at a time
This wax around 46% T1 Brazilian Carnauba Wax
Using an applicator pad apply in tight light circular motions
Allow to haze for around 10-15 min depending on air temperature then buff off with a clean microfibre cloth.
Wax 1-3 panels at a time.
Clarity Clay Lube
Our Clay lube smells amazing, it gives a great reliable lubricity to aid your Clay Bar glide safely across the paint work, in order to collect fall out and tar spots; leaving your paint smooth and ready for polishing and protecting
Simply spray onto the panel and gently rub the clay bar across the paint until your paint feels smooth, this is when any dirt will have been lifted from the paint, to finish wipe over with a clean microfibre cloth.